Not every building needs an addressable system. A shop, a school block or a small factory often needs a reliable, low-cost alarm that works and is easy to service. Ravel, Agni and Cooper fire alarm in Hyderabad covers that need. Compare it with our other fire alarm systems before you decide.
How a conventional panel works
Detectors and call points are wired in groups called zones. When one trips, the panel lights the zone and sounds the hooters. The guard knows the floor or wing but not the exact device.
That is enough for a small building, where staff can check a few rooms in minutes. In a large building it wastes time, which is where an addressable system earns its cost.
The three makes
Ravel, Agni and Cooper panels come in a range of zone counts. They accept common detectors and sounders, so replacing a failed part is simple and spares are easy to find.
We help choose by zone count and building layout, then check that detectors, base type and sounders match the panel. A panel with spare zones leaves room to add a wing later.
Who we design for
Builders and architects of small blocks and schools can specify these panels on the drawings, and MEP consultants can send the specification for a priced zone plan. Corporates use them in branch offices and stores. Hospital owners use them in small clinics, and industries use them in sheds and offices. Defence establishments, including Indian Navy and Army sites, can ask for a plan and quote, subject to their security and vendor-registration rules.
Servicing systems fitted by others
Many Hyderabad shops and schools have a conventional alarm that nobody tests. We survey it, test every zone, check the battery and charger, and list the faults in writing.
Often the fix is cheap: a battery, a few dusty detectors, a broken cable joint. We tell you what to repair and what to replace, and fit the repair ourselves. Our fire safety AMC puts the checks on a schedule.
When to choose something else
If the building has several floors or large floors, a zone panel slows the response. We then recommend FireLite or Honeywell Morley addressable panels.
The aim is the right panel for the building, at the right cost.
Conventional fire alarms across Hyderabad
Shops and showrooms in Kukatpally, Uppal and Begumpet, schools in Miyapur, and small factories at Jeedimetla and Patancheru are typical jobs. Small office floors in Madhapur and Kondapur also use conventional panels.
Fire inspection is carried out by the Telangana State Disaster Response & Fire Services Department. Our Gachibowli team installs and services each panel, and the Hyderabad office page lists our other services. Coastal sites can read our Ravel, Agni and Cooper fire alarm in Visakhapatnam page.
Areas we serve. Not sure we cover your area? Call the office and ask.
- Kukatpally
- Uppal
- Begumpet
- Miyapur
- Jeedimetla
- Patancheru
- Madhapur
- Kondapur
Standards and approvals
We design to NBC 2016 Part 4 and IS 2189, using devices with EN 54 or UL listings as stated by the maker. The fire department decides what each building needs, and Essatech does not issue or promise approval. See our fire alarm system page for detector choice. These terms apply to every Ravel, Agni and Cooper fire alarm in Hyderabad we install.
How the work runs
- Send drawingsShare floor plans, the building list and any panel make already specified.
- DesignWe plan panels, loops or zones, devices and cable routes, and draft the cause-and-effect list.
- QuoteYou get an itemised quote that names each part and the Hyderabad site work.
- InstallOur engineers lay cable, fit devices and wire the panels floor by floor.
- Commission and hand overWe test every device and action, then hand over drawings and records for your Hyderabad site.
Brands we supply
- Brand
- Ravel
- How we work with it
- We supply and install this brand
- Brand
- Agni
- How we work with it
- We supply and install this brand
- Brand
- Cooper
- How we work with it
- We supply and install this brand
What affects the price
- Number of zones
- Detector and call-point count
- Panel make and size
- Hooters and strobes
- Cable and conduit route
- Battery backup
- Servicing of an existing system
What to send us
- Floor plans or a sketch
- Number of floors and rooms
- Existing panel make and model, if any
- Date of the last service, if known
- Your deadline