Night shifts are where weighbridge losses grow. The operator is tired, alone and under pressure from waiting drivers. An unmanned weighbridge system in India takes the operator out of the routine trips and leaves only exceptions for a supervisor.
It is built on the same parts as our weighbridge software automation and ANPR weighbridge automation pages, with a driver kiosk and stricter rules added.
How an unmanned weighing trip runs
The truck stops at the entry barrier. ANPR reads the plate, or the driver taps an RFID card at the kiosk. The software checks the truck against an open order and opens the barrier.
Position sensors confirm the truck is fully on the platform and the traffic light turns red. The stable weight is captured with photos, the slip prints at the kiosk, and the exit barrier opens.
- Stage
- Identify truck
- Control
- ANPR or RFID card
- Stage
- Enter platform
- Control
- Entry barrier and light
- Stage
- Check position
- Control
- Infrared or laser sensors
- Stage
- Capture weight
- Control
- Indicator data and photos
- Stage
- Leave
- Control
- Kiosk slip and exit barrier
Rules that replace the operator
The software applies the rules a good operator would. It blocks unknown trucks, rejects weighing when the truck is not fully on the platform, and flags tare weights that differ from the usual value.
Each exception goes to a supervisor's screen or phone with photos. The supervisor approves or rejects it remotely, and the decision is logged.
Hardware for unattended use
An unmanned weighbridge system in India needs strong outdoor kit. ANPR and overview cameras need infrared for night reading. Barriers must handle many cycles. The kiosk must resist dust, rain and rough use.
Our ANPR camera system and boom barrier pages describe those parts. Regular trucks can carry windshield tags, as explained on our UHF RFID gate automation page.
When unmanned makes sense
It suits sites with many repeat trucks, long working hours and clear orders, such as mines, cement and steel plants and bulk yards. Sites with many one-off visitors may keep an operator by day and run unmanned at night.
We review your truck mix, order process and power backup before suggesting full unmanned operation.
Standards and approvals
Weighbridge calibration and stamping stay with the weighbridge maker and the Legal Metrology department in each state. Essatech connects to the indicator through its data port and does not alter load cells, seals or legal settings. Barriers and gates keep safety sensors and a manual release.
How the work runs
- Send the site detailsShare photos, a sketch of the weighbridge and the number of users or vehicles. We list missing details before the visit.
- Survey and proposeOur engineer checks the ground, power, cable routes and links to other systems. The written proposal lists every item and who does each job.
- Install and testCivil work, fixing, wiring and settings follow an agreed plan. We test safety sensors, fire release and manual override with your guards.
- Hand over and supportYou get user training, settings records and a service plan. Faults found later are logged and fixed under the agreed terms.
What affects the price
- Cameras, sensors and barriers per bridge
- Kiosk, RFID cards and software rules
- Remote approval, ERP link and support terms
What to send us
- Weighbridge make, size and indicator model
- Trucks per day and share of repeat trucks
- Night shift arrangements
- ERP or order system in use


